
ServicesWater Testing
Water Testing & Analysis in Lockhart
A filter or softener should only be suggested once the water itself has been measured. We take samples in your home, explain every reading in plain terms and give you a straight answer on whether any treatment is needed.
Start with a test, not a sales pitch
Water testing is the first thing we do for every customer, because the right equipment depends entirely on the results. Hardness, chlorine, iron, pH and total dissolved solids each point toward a different answer. A softener does nothing for chlorine taste, and a carbon filter will not stop scale on your fixtures.
The test is also useful after sudden changes. Heavy storms and line repairs can stir up sediment, and you may notice cloudy water, an odd smell or a new taste. A quick reading tells you whether it is a passing issue or something worth treating.
We keep the visit calm and unhurried. You see the readings yourself, and you leave with a written summary whether or not you buy anything.
What the water test covers
Hardness reading
We measure calcium and magnesium in grains per gallon. This number decides whether water softener installation, a salt-free water conditioner or neither makes sense for your home.
Chlorine level
Chlorine is a normal part of city treatment, but it is what most people taste and smell. We show you the level so you can judge whether whole-home filtration is worth it.
Iron and sulfur check
Orange stains in sinks and a rotten-egg smell from the hot tap have different causes. We test for iron and note any sulfur odor, which tells us whether iron and sulfur removal belongs in the conversation.
pH and dissolved solids
pH affects how water treats copper and older pipes. Total dissolved solids give a broad picture of what is in the water, and a high reading is often where reverse osmosis systems earn their place under the sink.
A written summary
Every reading is recorded and left with you. If we recommend anything, it is listed by line item with the reason beside it.
When a water test is worth booking
Pale scale around faucets and glass
A chalky film building up at faucet bases, on shower heads and across shower doors usually means minerals in the water. Measuring how much is there comes before choosing any fix.
A new taste or odor after severe weather
Cloudiness or an earthy, chemical note after a hard storm or nearby line work deserves a check. It often settles on its own, and a reading confirms that before you spend anything.
Rust rings or dark marks on porcelain
Orange rings in toilets and dark spotting in tubs point toward iron or manganese. Scrubbing removes the mark; testing tells us where it comes from.
Cloudy glassware and towels that stay rough
Spots that dry onto dishes and laundry that never softens are everyday clues that minerals are riding along in the water.
Original plumbing in an older house
Aging pipes and solder can change what arrives at the faucet. Sampling right at the tap shows what the plumbing contributes along the way.
A system was quoted without a test
If someone has proposed equipment without measuring your water first, an independent reading lets you see whether that recommendation actually fits your home.
How a testing visit runs
- 1
A short phone call
You tell us what you are noticing and when it started. We set a time that suits you and ask which taps and fixtures concern you most.
- 2
Testing at your tap
We draw samples from the kitchen faucet and, where useful, a bathroom or the hot side. Readings take minutes, and you are welcome to watch each one.
- 3
Going through the results
We sit down with you and explain each number against normal ranges. If your water is fine, we say so and leave it there.
- 4
Honest next steps
If treatment would help, we explain which option fits and why, and give you a quote by phone or in person. If a question needs an outside laboratory, we tell you plainly and explain how that sample is taken and sent.
What affects cost after the test
The in-home water test is free, and nothing is owed afterward. Costs only arise if you choose extra lab work or decide to treat your water. If you do, we explain each factor before anything is installed.
- What the results show
- A single issue, such as chlorine taste, usually needs one system. Hardness paired with iron may call for two stages working together.
- Outside lab panels
- Some questions, like lead from older plumbing or specific trace contaminants, are best answered by an independent laboratory. The panel you pick sets that cost.
- Equipment size and type
- A drinking-water system under one sink is a smaller project than whole-home equipment sized for every bathroom and appliance.
- Your plumbing layout
- Where the main line enters, how much space is available and whether a bypass loop already exists all shape the work. We also offer free installation, which takes labor off the bill.
Water testing questions
Something not covered here? (512) 710-0596
Is the water test really free?
Yes. We come to your home, test the water and explain the results at no charge. There is no obligation to buy anything, and plenty of visits end with us telling people their water is fine as it is.
How long does the visit take?
Most visits take under an hour, including the time we spend talking through results. If you have several concerns or more than one tap to check, it may run a little longer.
My water tasted strange after a storm. Should I test right away?
Follow any boil-water notice from your water provider first. Once it is lifted, if the taste or color has not settled after a few days of normal use, a test is a sensible next step. It separates a short-lived disturbance from a problem that needs treatment.
Does an in-home test check for lead?
Our in-home test covers hardness, chlorine, iron, pH and dissolved solids. Lead has to be measured by an independent laboratory to get a reliable number. If your home has older plumbing, we explain how to arrange that sample and what the results mean.
If I buy a system after the test, what warranty comes with it?
We warrant the systems we install: lifetime warranty on tanks and ceramic discs, 5 years on the control valve, circuit board and filter media, and 1 year on labor. We go over which part applies to the system you choose before installation.

Get real numbers on your water
A single visit puts the readings in front of you and gives you an honest view on whether treatment is worth it. We work in Lockhart and nearby towns including Luling, Kyle and Buda.